 Plasma Dial Installation |
 May 7, 2011 - 2:25 PM
|
 
|
|
Enthusiast Joined May 7, '11 From Stockport Currently Offline Reputation: 0 (0%)  |
I recently purchased some indigo dials, and have them all in place in the instrument cluster. The needles move, and everything is good. Except for one thing; which wire do I connect my red power wire to? There are 3 wiring harnesses that fit in to the back of the instrument cluster, one with 10 wires, one with 12 wires, and one with 16 wires. I've got the metal firewall right behind the instrument cluster, so that'll ground, but which wire is the instrument cluster lights? There's so many to pick from and I really think I might cry.
Please help! Thanks, Andy. |
 |
Replies
|
May 8, 2011 - 12:51 PM
|
|
|
Enthusiast Joined May 7, '11 From Stockport Currently Offline Reputation: 0 (0%) |
That was absolutely spot on - I wired it to the earth and illumination wires, and it's perfect. Thank you so much for your help.
Andy. |
|
May 9, 2011 - 5:18 AM
|
|
|
Enthusiast  Joined Dec 30, '10 From amarillo texas Currently Offline Reputation: 6 (100%) |
QUOTE (MagnaMorbius @ May 8, 2011 - 12:51 PM)  That was absolutely spot on - I wired it to the earth and illumination wires, and it's perfect. Thank you so much for your help. Andy. hey no problem, and mkernz yeah you can do that but then you have to worry about a fuse and wire the switch its just a pain then you have to turn it on. ^^ that way you just have to turn your lights on like normal. |
Posts in this topic
MagnaMorbius Plasma Dial Installation May 7, 2011 - 2:25 PM
4-eyed-freek splice into the cigarette lighter. you will have t... May 7, 2011 - 4:59 PM MagnaMorbius What are the wiring colours on the cigarette light... May 7, 2011 - 11:51 PM ST205WRC if you want them on only when you turn your lights... May 8, 2011 - 7:53 AM
mkernz22 You could have wired it to a switch too May 8, 2011 - 1:21 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 26th, 2025 - 7:43 PM |