need to know Options

[gtprominient]

hi does anyone if metal exhaust manifold gasket is available for the gen3 3sge

[gtprominient]

I know that the factory 3SGTE exhaust manifold gasket is a 3 layer metal gasket. It should have the same stud pattern as the 3SGE.

part: 17173-88581

That one needles is holding is the turbo exhaust gasket, and looks like a standard pressed/stamped one out of generic gasket paper.

part: 17173-88581 that one cannot work the gen 3 3sge has bigger ports and the lug pattern is different.

That part is for a Gen3 3SGTE (ST205) which is the same lug pattern as the 3SGE?
Like this:



You're after an exhaust manifold gasket right? Goes between manifold and head?

Why is everyone showing turbo flanges?[code][/code]

yes the manifold and head but i am tellin you that my port holes are wider and in a differ in position where it meets the head.i bougth a cast iron and it could not fit and bougth one of tubular rev 3mani and it had the same port holes like thecast iron, had to cut the plate off the 3sge mani curve the pipes and weld it back on.
i think i have a spare asbestos gasket lying around i will try taking aic to show what it looks like