![]() |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) ![]() |
Getting closer to finishing my cold airbox, just giving it a good sanding and tidy up etc.
![]() And was thinking whether I should: Polish up the sides and lid OR have a polished lid, and use a carbon fiber vinyl/film on the sides OR Something else -------------------- |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Nov 5, '07 From New Zealand Currently Offline Reputation: 3 (100%) ![]() |
yup its aluminium (1.6mm thick)
Nice idea about the clear lid, but as I'm sanding the outside welds down, I've put a few extra welds in the inside to keep it strong. However I do have a few stickers: TRD, Tein, HKS, K&N & RHDJapan.com ![]() Its proving to be a bit difficult to buy that Reflect-A-Cool tape over here in NZ, theres a few places that stock the DEI brand but dont carry this line for some reason, and do not want to stock it. haven't emailed any of these guys yet. http://www.designengineering.com/storelocator/australia-nz Thoughts about putting that Reflect-A-Cool tape on the inside? Or would that defeat the purpose of having it? -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 2:27 AM |