May 16, 2011 - 5:05 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
Well.... got the car running yesterday drove it for a while. Some coolant leaking which turned out to be a bad radiator cap.
Today got it up to temperature, it just pours white smoke out of the exhuast. I know that usually means headgasket... however it's brand new. I cleaned the head and block, but didnt have the head decked. It seemed smooth though. Should i start ripping it apart or any other ideas? I've never seen a bad head gasket pour this much smoke which is strange. Doesn't necessarily have that sweet smell either, but not sure what else it could be. This post has been edited by czwalga: May 16, 2011 - 5:08 PM -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
![]() |
May 16, 2011 - 9:07 PM
|
|
|
Enthusiast ![]() Joined Mar 1, '11 From Morgantown, WV Currently Offline Reputation: 0 (0%) |
When I put used 7AFE in my celica, it had a lot of white smoke too in the start. I also thought it was a blown head gasket. The car was sitting for couple years so there might have been a lot of moisture in the exhaust system. Keep and eye on the coolant and the temperature gauge. Also check for the condition of the oil and make sure it does not look milky. White smoke in mine went away after a few days. It also did not smell like coolant or oil.
|
czwalga Pouring white smoke out of the exhaust. May 16, 2011 - 5:05 PM
Smaay its possible that it overheated the day before and... May 16, 2011 - 5:38 PM
czwalga QUOTE (Smaay @ May 16, 2011 - 6:38 P... May 16, 2011 - 6:03 PM
delusionz QUOTE (Smaay @ May 17, 2011 - 10:38 ... May 16, 2011 - 7:58 PM
czwalga I dunno, i tested it again. It's not bad at i... May 16, 2011 - 6:21 PM
czwalga QUOTE (wvuguy @ May 16, 2011 - 10:07... May 17, 2011 - 7:16 AM
trdproven if its been sitting for a while could be moisture,... May 17, 2011 - 9:39 AM
czwalga Took the head off. Doesn't seemed warped at a... May 18, 2011 - 7:35 AM
mkernz22 it's probably just from the engine sitting for... May 18, 2011 - 8:01 AM
czwalga QUOTE (mkernz22 @ May 18, 2011 - 9:0... May 18, 2011 - 8:11 AM
czwalga Just got a call back from the machine shop. Head ... May 19, 2011 - 7:49 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 19th, 2026 - 5:38 PM |