May 16, 2011 - 11:04 AM
|
|
|
Enthusiast ![]() ![]() Joined Dec 7, '10 Currently Offline Reputation: 1 (100%) |
It happened to me twice since I own the car (6months)
I turn on the car and start driving, then "bling" check engine light is on...usually the ecu would shut everything and drive on very rich fuel... I didn't noticed any loss of performance, I wasn't going far so I parked the car, did my stuff...then turned on the car and drove around a bit...the light never turn on again... |
![]() |
May 16, 2011 - 10:39 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
Yeah the ECU remembers codes while the battery is still plugged in.
To clear codes from ECU memory you disconnect the battery, or pull the ECU and EFI fuses and let it sit for 10 mins before reconnecting. -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
TheChildOfTheSea Random Check Engine Light? May 16, 2011 - 11:04 AM
Smaay then dont worry about it. but you really need to c... May 16, 2011 - 5:40 PM
TheChildOfTheSea I'll have them checked next time I go to the g... May 16, 2011 - 5:54 PM
delusionz It's a simple one you can do yourself, here is... May 16, 2011 - 8:12 PM
TheChildOfTheSea can I still verify the code if the engine light do... May 16, 2011 - 9:33 PM
TheChildOfTheSea Ok thanks! I'll do this! May 16, 2011 - 10:48 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 30th, 2026 - 6:52 AM |