![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 9, '08 From Blainville Currently Offline Reputation: 4 (100%) ![]() |
I have a project planned for my celica and I just had some questions for you guys.
I will be going for a Fwd to Rwd conversion so I wanted to know which 3sgte is more suitable for the swap? I believe both (mr2's and celica's) 3sgte are trans. mounted? So is there one of them that would be easyer to fit to a Rwd tranny? Also if you guys could come up to me with some parts I would have to change (and from which car I could take these from if possible) and stuff I would need to do I would appreciate it. I know I would have to get these: -Drive shaft -Differential -Probably change the whole rear suspention parts -Rwd tranny That's what's on the top of my head but I surely forget many things. Don't worry, I will not get into this before I will have enough knowledge. I will soon study in car mecanic before I begin all this. Thanks for your help! This post has been edited by dudeofchaos: May 10, 2011 - 8:51 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 15, '02 From Tasmania(Australia) Currently Offline Reputation: 0 (0%) ![]() |
The gt8 your talking about is owned by a guy called Justen, lives in Canberra, its a Group A Rallye ST185, twin turbo (and sometimes supercharged too) 1uz, gearbox is Tremec TKO600 box.
as mentioned the diff is jza70 as are the driveshafts. Whole front subframe is custom. -------------------- ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582r
GRX133 Toyota Mark X 350s ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: September 19th, 2025 - 6:42 PM |