Problem finding a exhaust manifold with T3 fllange, With wastegate flange Options

[Iceman22]

Hello.
My friend has bought a garrett turbo kit for his celica st205.
The turbo will have a external wastegate (42mm), now we got all the parts we need, including a T3 downpipe.

BUT, we are struggling with the exhaust manifold. We can't find any manifolds with T3 flange that fits this engine, also we need to have a hole for the wastegate.
We are desperately needing one but we can't find one, so now we are planning to use a after market manifold with CT20B flange. It can perhaps be used if we cut the flange, and make a T3 flange and weld it on the manifold, plus we need to drill a hole on it for the wastegate.
The problem is that it is much hard work and easier said than done.

So, I'm wondering if anyone know where I can get this T3 manifold for a reasonable price ? Is it possible ? I have found some on eBay but they are for the 2nd gen engine, but they are also without the hole for the wastegate.

What should we do ??

This post has been edited by Iceman22: May 19, 2011 - 7:33 AM