![]() |
![]() |
![]() |
|
Enthusiast Joined May 21, '11 From Vancouver Currently Offline Reputation: 0 (0%) ![]() |
OK so i bought a 1994 Celica GTS 5spd and am replacing the aftermarket cd deck, there was a crappy sony one in there that wasnt wired properly so i took it out. I have a JVC USB Bluetooth deck to install. The car has no harness, i have to hard wire it. There are duplicate colored wires coming from the factory dash which is making the install difficult. I already checked out installdr but it doesnt help. Anyone have input on my situation?
This post has been edited by hawkoner: May 27, 2011 - 2:08 AM |
![]() |
![]() |
|
Enthusiast Joined May 21, '11 From Vancouver Currently Offline Reputation: 0 (0%) ![]() |
The installer at the shop wired a new ignition (yellow) wire to the head unit and it turned on. He tested the factory amp and said its fried and to get a new one or unplug the harness below the amp and connect to new harness i bought then manually wire the speakers to the new harness and vualla. Does this sound accurate? Is there anything i need to know before i go about doing this, tips etc.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 9:01 AM |