![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 7, '03 From Northern Virginia Currently Offline Reputation: 23 (100%) ![]() |
Painting my new front end
5/25/11 First time using my new best friend. This was SO MUCH faster than by hand. Took like 20 minutes! ![]() No before, but here's the after. ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 7, '03 From Northern Virginia Currently Offline Reputation: 23 (100%) ![]() |
5/28/11
All sanded parts getting ready for first shot of primer ![]() Fenders match after some plier/hammer work ![]() Stopped at the auto body shop for some supplies. Body filler, base/thinner (1:1), clear/hardener (4:1), primer/thinner (1:1) I have two of most because of the leftovers I had from previous projects. ![]() The ding and scratches from the sander. Note to self, never use such a super low grit (80) just to take off paint. ![]() Poorly done job of ding fixing and sanding. I could still see after the first layer of primer. ![]() Go away rain. I have to spray. ![]() Rain went away so I sprayed. Just a couple coats for 320 grit sanding to see my imperfections. ![]() Primered pics ![]() ![]() 5/30/11 320 grit sanding ready for a wash prior to another layer of primer ![]() ![]() I still have to fix/fill/sand some parts before another coat of primer then 600/800 grit sanding prior to base coat. |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 11:20 AM |