May 29, 2011 - 8:13 PM
|
|
|
Enthusiast ![]() Joined Jun 4, '10 From Jax Beach, FL Currently Offline Reputation: 0 (0%) |
I dont know if this has anything to do with the sudden problem, but I never had a problem with my clutch before. My car is at 190k. Last week I changed the tranny fluid because of rough shifting and occasional grinding. It fixed everything now my tranny shifts are all smooth. NIght and day difference. But today I ran into a new problem. I parked, got into my car started it pressed down on the clutch and the clutch wouldnt disengage because it wouldnt let me shift into any gears...so I turned of the car shifted into gear and it worked from there on. Again..later today I stopped at a light pressed down on the clutch and it wouldnt let me shift so I turned the car off then shifted and started it back up and it worked fine. What seems to be causing this problem?
|
![]() |
Jun 2, 2011 - 2:31 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Dec 15, '02 From Tasmania(Australia) Currently Offline Reputation: 0 (0%) |
intermittent fault, i doubt its mechanical (such as a pressure plate finger, clutch fork, throw out bearing etc)
Look at the hydraulics first. Had a similar issue on a mates 184 i was fixing, seals in the master cylinder was the issue. Get someone to depress the clutch and you watch how much travel there is in the clutch fork, take note. Then when it plays up do the same thing, see if the travel is equal or less. This post has been edited by Cuts_the_Pilot: Jun 2, 2011 - 2:33 AM -------------------- ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582r
GRX133 Toyota Mark X 350s ![]() |
m2736185 Clutch has been acting up. Sometimes it doesnt work May 29, 2011 - 8:13 PM
mkernz22 could be the throw out bearing, is there any chatt... May 29, 2011 - 8:26 PM
m2736185 Nope, not that I call tell May 29, 2011 - 10:44 PM
njccmd2002 slave cylynder? maybe? when was the last time yo... May 30, 2011 - 1:09 AM
m2736185 Well, I have only had the car for the last 15k....... Jun 1, 2011 - 3:50 PM
Smaay sounds like one of the springs on the disk broke, ... Jun 1, 2011 - 5:22 PM
m2736185 You mean one of the clutch springs? It just might ... Jun 1, 2011 - 7:32 PM
mkernz22 not something you want to wait on replacing becaus... Jun 1, 2011 - 9:14 PM
Cuts_the_Pilot Get the master cylinder rebuild. Jun 1, 2011 - 11:55 PM
Smaay i doubt its the master cylinder Jun 2, 2011 - 12:43 AM
bloodMoney That's not entirely true.
In December, I was... Jun 2, 2011 - 9:08 AM
m2736185 The clutch doesn't get stiff. it will just sto... Jun 2, 2011 - 4:15 PM
mkernz22 I would believe if it squeaks, then it is somethin... Jun 2, 2011 - 7:38 PM
Cuts_the_Pilot ahh well if there is squeeking then its possible i... Jun 2, 2011 - 8:29 PM
delusionz my clutch squeeks too when you press the pedal in ... Jun 3, 2011 - 2:38 AM
Smaay its not air unless you opened the system. air does... Jun 3, 2011 - 12:27 PM
xrav22 QUOTE (Smaay @ Jun 3, 2011 - 12:27 P... Jun 6, 2011 - 3:54 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 12th, 2026 - 11:22 AM |