oem bumper fitment issues, need some suggestions on fixing gaps. Options

[opie_7afe]

ok the issue im having is fairly simple, my bumper dont line up flush with my highbeams nor does it have a small enough gap between bumper and hood....also one side is spaced out more then the other....what would be the best way of getting it lined up perfect...just little adjustment things like this always catches my eye and makes me need to get it figured out...i guess i should take some pics...also nothing looks bent/out of place that the bumper mounts to so thats why its sorta irritating.....offer me your suggestions if you have the same issues, thanks guys!





This post has been edited by opie_7afe: Jun 4, 2011 - 4:11 PM

[opie_7afe]

headlight rubbers wont make it line up properly just by visualy looking.......the high beam rubbers dont even sit flush with glass, and if people on this site wouldnt charge an arm and a leg for some peices of rubber id have some of them in....car didnt come with them....and there weather strip gaskets that wouldnt make it not line up properly...as its pushed out, not pushed in far enough....unless your talking about my high beam rubbers which i do have and are installed...just cant see them due to lighting...



This post has been edited by opie_7afe: Jun 4, 2011 - 6:24 PM