oem bumper fitment issues, need some suggestions on fixing gaps. Options

[opie_7afe]

ok the issue im having is fairly simple, my bumper dont line up flush with my highbeams nor does it have a small enough gap between bumper and hood....also one side is spaced out more then the other....what would be the best way of getting it lined up perfect...just little adjustment things like this always catches my eye and makes me need to get it figured out...i guess i should take some pics...also nothing looks bent/out of place that the bumper mounts to so thats why its sorta irritating.....offer me your suggestions if you have the same issues, thanks guys!





This post has been edited by opie_7afe: Jun 4, 2011 - 4:11 PM

[MaskedMan]

I would say that the car was bumped on the front passenger side, which caused the lower headlight/highbeam bracket to be pushed in. That is why your high beam doesn't sit flush with your bumper. Your upper bumper support bar is possibly pushed in a little bit too, which is why the bumper doesn't line up with the hood correctly. It's hard to say for sure, based off just 1 picture, and without actually taking a look behind the bumper. But those 2 parts being bent would be my best guess.