oem bumper fitment issues, need some suggestions on fixing gaps. Options

[opie_7afe]

ok the issue im having is fairly simple, my bumper dont line up flush with my highbeams nor does it have a small enough gap between bumper and hood....also one side is spaced out more then the other....what would be the best way of getting it lined up perfect...just little adjustment things like this always catches my eye and makes me need to get it figured out...i guess i should take some pics...also nothing looks bent/out of place that the bumper mounts to so thats why its sorta irritating.....offer me your suggestions if you have the same issues, thanks guys!





This post has been edited by opie_7afe: Jun 4, 2011 - 4:11 PM

[opie_7afe]

was deffinatly in a small fender bender for sure but as far as the bumper supports (lower and upper)its straight with no bends or anything but it could be the headlight bracket on pass. side as i know thats the only thing bent up behind bumper.and both of the high beams dont sit flush with the rubbers... its like the bumper just needs to be pushed back towards rear of car more....and from the pics ive seen it looks like theres still always a fairly large gap between bumper and hood...i just hate large gaps between body panels...i do know the weather strip gasket/metal strip is screwed up with a portion totaly seperated from rest of the metal.... but that i doubt has any thing to do with the gaps not as close as i would like....

This post has been edited by opie_7afe: Jun 4, 2011 - 6:38 PM