Project B: Clear Lenses for Headlights, Mass Production with Mould by Machine Options

[vincent_doggy]

The above pics just showing what this project is for, thats not the exact product.

Will use the stock headlight glasses to do a Mould and produce with Machinery.

The lenses material would pretty much like the plastic of the tail lights.

Crystal clear plastic.

Gonna be 2 colors to choose from:

Crystal Clear or Light Smoked

The cost would be usd$100 for all 4 with packing, but shipping would be on top depending on different countries, but since the weight is nothing, so the shipping gonna be cheap.

You might query about why I suddenly have lots of project to launch.

Since I just found another 6GC enthusiast who is willing to support me some funds for my projects.

However, your support is also required!!!

Just Put your name down if you want those, I would make it happen!!

This post has been edited by vincent_doggy: Feb 23, 2009 - 6:50 AM

[opie_7afe]

finding good material is sorta the tough part my best guess would be some kind of uv coated lexan...but that is pricy..ill just be doing a trial run using just normal plexiglass as its fairly cheap and if it fails atleast i tried. im sure better results from vacu-forming can be had by having a custom mold made just for the purpose vacu-forming...but im guessing most automotive plastics used in lenses have some sort of chemicals added to make the plastic have certain characteristics...we will see just have more important stuff to work on with my celli right now such as painting my front end!, good luck vincent and hopefully when they get produced ill buy some then(not putting my name on the list yet)