car wont start?, after swap Options

[Malhar95]

so brenton1919 was/is replacing my motor, everything is hooked up but the car wont start.
when we turn the key, no crank no nothing but u can hear the relay

he suspects is the computer since none of the dash lights come on when u turn the key to "ON" like they're suppose to (for example the check engine etc.)
question is how to swithc the computer/alarm off.
we're trying the switch near the pedals, but no luck

any suggestions?

[opie_7afe]

dont the engine harness connect to the body harness as some fuses in engine bay controll body type fuses, and have you checked starter yet? or the altinator wiring to make sure everything is connected? if you did a 5s to 5s swap then it should be working unless you forgot to hook something up, as i said go to your manual and start tracing power/ground wires, dont hurt to spend a couple hours tracing some wires just to be sure, even if you checked em do it again, ive did some stuff where at first look didnt spot anything wrong then look again and you find it out...