![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) ![]() |
Any one know how to wire this thing in because anything I find is in japanese... I know you cut the tiny short white wire to make it 4 cyl...
red is 12v + black grnd and where does the rest go regarding the ECU? -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) ![]() |
switch the green with yellow
-------------------- |
![]() |
|
Enthusiast ![]() Joined Sep 9, '08 From Jamaica Currently Offline Reputation: 1 (100%) ![]() |
switch the green with yellow ok, did that and the gain can now be moved from 0 and the car stays on, however the rev wont pass 2300 to 2400 no matter what the rev1 or rev2 setting is any other thoughts? those loops close to the box, which ones shud be cut to establish 4 cylinder (i cut the grey only) This post has been edited by Island_Racer: Jul 1, 2011 - 9:50 AM |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 4:25 PM |