6G Celicas Forums

Welcome Guest ( Log In | Register )

> 7afe engine swap to a 3sgte engine
post Jun 7, 2011 - 11:53 PM
+Quote Post
edpowers58

Enthusiast

Joined Jun 7, '11
From ftwalton bch fla
Currently Offline

Reputation: 0 (0%)




I WAS WONDERING IF ANY ONE ON HERE HAS DONE A ENGINE SWAP FROM A 7AFE ENGINE TO A 3SGTE ENGINE I KNOW IT IS A CONSIDERABLE AMOUNT OF WORK BUT I HAVE THE ECU HARNESS AND THE TRANSMISSION AS WELL BUT MY QUESTION IS WILL THE TRANSMISSION BOLT UP TO THE FWD OR IS THERE QUITE A NUMBER OF OTHER MODIFICATIONS I NEED TO MAKE IN THIS 6 GENERATION CELICA 1995 smile.gif wink.gif
 
Start new topic
Replies
post Jul 3, 2011 - 2:31 PM
+Quote Post
opie_7afe

Enthusiast
**
Joined Feb 26, '11
From beaufort,SC
Currently Offline

Reputation: 0 (0%)




stop using caps it seems like your yelling/demanding help. 3sge beams came fwd so you wont need to change out to a different transmission, unless your beams came with a auto trans or thats what you prefer. now i believe you will need s54 outer axles and your 7afe inner axles (im probly wrong on this most of my info is for the 3sgTe. now just so you realize you will need to get your wiring harness extended (around 400$ from dr.tweak) and you cant turbocharge a stock 3sge as the compression is too high and you would have to lower compression to do so. and the 7afe trans wont work with 3s engine the 7afe trans will work with the 4age however, also search the project threads plenty of people have swapped out a 7afe

This post has been edited by opie_7afe: Jul 3, 2011 - 2:31 PM
post Jul 4, 2011 - 7:52 AM
+Quote Post
edpowers58

Enthusiast

Joined Jun 7, '11
From ftwalton bch fla
Currently Offline

Reputation: 0 (0%)




QUOTE (opie_7afe @ Jul 3, 2011 - 3:31 PM) *
stop using caps it seems like your yelling/demanding help. 3sge beams came fwd so you wont need to change out to a different transmission, unless your beams came with a auto trans or thats what you prefer. now i believe you will need s54 outer axles and your 7afe inner axles (im probly wrong on this most of my info is for the 3sgTe. now just so you realize you will need to get your wiring harness extended (around 400$ from dr.tweak) and you cant turbocharge a stock 3sge as the compression is too high and you would have to lower compression to do so. and the 7afe trans wont work with 3s engine the 7afe trans will work with the 4age however, also search the project threads plenty of people have swapped out a 7afe

thanks iwas not demanding help but my vision isn,t quite what it use to be but your information has been very helpful thank you

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 24th, 2025 - 2:25 PM