Aug 11, 2011 - 12:34 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%) |
hey all i have a few questions that a few hours of idle searches and reading have not been able to help me find the info that i need..
i have a 95 ST auto that had the motor go out on, and i just picked up a 96 manual st as a parts car. right now ALL that i want to do is swap the motor over. JUST the motor, ill may do an auto to manual swap later, but not what im concerned about ATM. now i know that there is a difrence between the two 7Afe's (95-to-96) in reguards to power output from the factory. but what it was understanding was that it was just a tune from the factory, and the addition of some emissions stuff. what i would like to do right now at this point is get my car back on the road. so i was wondering if there are any difrences in reguards to the motor that will give me problems when switching it over, plugs, sensors, ecu-harness, etc.. or will i be able to just pull the motor from the 96, slap it on the auto, drop it in the 95, and plug everything up. and get on my way? i could write more and make this alot more winded than it is, but i want to keep it simple. thank you in advance for any relative info. mandrek. -------------------- |
Smaay just pull the engine and use your manifold and sen... Aug 11, 2011 - 2:53 PM
mandrek QUOTE (Smaay @ Aug 11, 2011 - 3:53 P... Aug 11, 2011 - 3:22 PM
stephen_lee IMO it'd be easier to do the auto-manual swap.... Aug 11, 2011 - 3:45 PM
mandrek QUOTE (stephen_lee @ Aug 11, 2011 - 4... Aug 12, 2011 - 8:00 AM
mandrek anyone got info on how to identify the diffrences ... Aug 12, 2011 - 8:04 AM
Bitter QUOTE (mandrek @ Aug 12, 2011 - 8:04... Aug 14, 2011 - 12:53 PM
mandrek QUOTE (Bitter @ Aug 14, 2011 - 1:53 ... Aug 15, 2011 - 11:07 AM
stephen_lee OBDII should have a diag box inside the car under ... Aug 12, 2011 - 8:37 AM
mandrek QUOTE (stephen_lee @ Aug 12, 2011 - 9... Aug 13, 2011 - 1:59 PM
mandrek yup, there it is , plane as day w/ a BIG plasic ca... Aug 14, 2011 - 12:22 AM
presure2 The obd2 stuff isn't a big deal, its all contr... Aug 14, 2011 - 12:04 PM
stephen_lee its harder to fool newer ECUs into accepting a tun... Aug 15, 2011 - 11:25 AM
mandrek QUOTE (stephen_lee @ Aug 15, 2011 - 12... Aug 15, 2011 - 4:42 PM
Bitter problem with a piggy back for boost is that you... Aug 15, 2011 - 7:46 PM
celica-s The 7afe OBDII should be distributor less sir, hen... Aug 15, 2011 - 7:55 PM
Bitter Not in the US, the A series has a distributor till... Aug 15, 2011 - 8:05 PM
stephen_lee Bitter is right. In the US we got a dizzy still, b... Aug 16, 2011 - 9:12 AM![]() ![]() |
| Lo-Fi Version | Time is now: December 6th, 2025 - 5:17 PM |