![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 4, '05 From western MD/NOVA Currently Offline Reputation: 2 (100%) ![]() |
hey all i have a few questions that a few hours of idle searches and reading have not been able to help me find the info that i need..
i have a 95 ST auto that had the motor go out on, and i just picked up a 96 manual st as a parts car. right now ALL that i want to do is swap the motor over. JUST the motor, ill may do an auto to manual swap later, but not what im concerned about ATM. now i know that there is a difrence between the two 7Afe's (95-to-96) in reguards to power output from the factory. but what it was understanding was that it was just a tune from the factory, and the addition of some emissions stuff. what i would like to do right now at this point is get my car back on the road. so i was wondering if there are any difrences in reguards to the motor that will give me problems when switching it over, plugs, sensors, ecu-harness, etc.. or will i be able to just pull the motor from the 96, slap it on the auto, drop it in the 95, and plug everything up. and get on my way? i could write more and make this alot more winded than it is, but i want to keep it simple. thank you in advance for any relative info. mandrek. -------------------- |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
The obd2 stuff isn't a big deal, its all controlled by the ecu.
Do like smayy suggested, and you will be good to go. Use the harness and ecu from the car it'd be going in, and all the accessories as well. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: September 10th, 2025 - 4:39 PM |