 oil pressure gauge, what is the normal pressure |
 Aug 10, 2011 - 2:15 PM
|
 
|
 Enthusiast  Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%)  |
my oil engine light came out whethever i puss the gas a little bit .... when im on gear and running, and goes away the second i leave the gas completly
if i put just a bit when accelerating , it will do it but sometimes flash. i dont lose and burn any oil my dipstick have correct oil in it, i did change oil and did put the excxat amount on it, so it dont need more oil why my oil light came out , ? This post has been edited by Needles: Aug 18, 2011 - 12:42 PM |
 |
Replies
|
Aug 14, 2011 - 3:15 PM
|
|
|
Enthusiast Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%) |
i have unbolt the bolt next to the original oil pressure gauge and bolt my gauge line in there,
but there is no oil there, and there was no oil there, the back of the little hilinky bolt is black dry , should i took off the original sensor and T it there ? or is not normaL i dont have oil coming in the gauge tube from where i have T it |
Posts in this topic
Needles oil pressure gauge Aug 10, 2011 - 2:15 PM
jordisonjr Low oil pressure? Aug 10, 2011 - 2:45 PM 6G96GT maybe your oil pump is on its way out? Perhaps you... Aug 10, 2011 - 3:18 PM
Needles QUOTE (6G96GT @ Aug 10, 2011 - 3:18 ... Aug 13, 2011 - 2:19 PM SupraKid You should be running a oil pressure gauge, becaus... Aug 13, 2011 - 3:19 PM Needles no oil goes tru the tube i tee in the engine...
si... Aug 15, 2011 - 1:48 PM stephen_lee i would use the same port as the stock pressure sw... Aug 16, 2011 - 9:23 AM Needles its look that way, oil pump fail, im not sure but,... Aug 16, 2011 - 1:41 PM stephen_lee DEATHs OEM oil pump (rather the oil pump pulley) f... Aug 16, 2011 - 4:37 PM Needles i have succesfully install the oil plug into the o... Aug 18, 2011 - 12:04 PM 6G96GT QUOTE (Needles @ Aug 18, 2011 - 12:0... Aug 19, 2011 - 7:23 PM Soulend Oil is cold at start up and so its thick causing h... Aug 18, 2011 - 3:25 PM stephen_lee loooks like toyota wants >5psi at idle and 36-7... Aug 18, 2011 - 4:46 PM Needles after installing the gauge, its seem its all good,... Aug 18, 2011 - 10:17 PM Delta_Phoenix Low pressure = high flow = oil is hot and thin. OR... Aug 20, 2011 - 11:16 PM Needles in fact , i worked all day whit my car , (3sgte 3t... Aug 21, 2011 - 12:43 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 26th, 2025 - 5:43 PM |