 hks BOV install... |
 Aug 11, 2011 - 5:22 PM
|
 
|
|
Enthusiast  Joined Jul 27, '11 From calgary Currently Offline Reputation: 0 (0%)  |
i looked through a ton of pages and cant get answers to this for some reason. the stock valve has 2 hoses at the top and 2 at the bottom, my ssqv (old style with screw) only has a spot for one hose, which hose goes here and what to do with all the other hoses? thanks!
|
 |
Replies
|
Aug 15, 2011 - 2:56 PM
|
|
|
Enthusiast Joined Dec 30, '10 From amarillo texas Currently Offline Reputation: 6 (100%) |
yes it does kinda. the pipes are there going to the manifold but they are blocked off. the holes are not drilled out so it just kinda sits there. it routes 2 ways into those pipes and back around to the valve on the intake that all the normal ones have. its gay and i took both off the pipes are now just open, and i made a block off plate for the factory location and sealed it off since its not used any more. in the top picture you can kinda see the plate and the orange silicone that i used to seal it off.
|
Posts in this topic
94_gt4 hks BOV install... Aug 11, 2011 - 5:22 PM
ST205WRC is it WRC or non WRC model? Aug 11, 2011 - 5:43 PM 94_gt4 APPARENTLY WRC lol Aug 11, 2011 - 5:45 PM ST205WRC if its a WRC it is a dual valve setup. there shoul... Aug 11, 2011 - 6:18 PM 94_gt4 theres also 2 other hoses attached underneath the ... Aug 11, 2011 - 6:49 PM 94_gt4 well its done, not very loud as there is no insert... Aug 12, 2011 - 6:45 PM Neon90424 Didnt the WRC have the Oem BOV blow into the anti ... Aug 15, 2011 - 11:31 AM
delusionz i think he means the stock 3sgte bov has a t piece... Aug 15, 2011 - 7:29 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 5:15 AM |