Aug 10, 2011 - 2:15 PM
		 | 
		
			
			 | 
	
		    
				
				
				
				
				
				
        	
        	![]() Enthusiast ![]() ![]() ![]() Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%)  | 
       
			
			 
				my oil engine light came out whethever i puss the gas a little bit .... when im on gear and running, and goes away the second i leave the gas completly 
			
			
					
		if i put just a bit when accelerating , it will do it but sometimes flash. i dont lose and burn any oil my dipstick have correct oil in it, i did change oil and did put the excxat amount on it, so it dont need more oil why my oil light came out , ? This post has been edited by Needles: Aug 18, 2011 - 12:42 PM  | 
	
![]()  | 
	
			
			   Aug 18, 2011 - 12:04 PM
		 | 
		
			
			 | 
	
		    
				
				
				
				
				
				
        	
        	![]() Enthusiast ![]() ![]() ![]() Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%)  | 
       
			
			 
				i have succesfully install the oil plug into the original oil pressure oil, 
			
			
					
		pressure is 60 at start when hot 20 at iddle, and soon i press the gas oil pressure goes back to 60 someone know what it mean ?  | 
	
			
			   Aug 19, 2011 - 7:23 PM
		 | 
		
			
			 | 
	
| 
		    
				
				
				
				
				
				
        	
        	 Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  | 
       
			
			 i have succesfully install the oil plug into the original oil pressure oil, pressure is 60 at start when hot 20 at iddle, and soon i press the gas oil pressure goes back to 60 someone know what it mean ? That sounds good, mine is at about 70 at start up and then once warmed fully, it will idle at 20. If I get the rpms up to about 3100, it peak at 60. I think your pressure is perfect.  | 
	
 Needles   oil pressure gauge   Aug 10, 2011 - 2:15 PM
 
 jordisonjr   Low oil pressure?   Aug 10, 2011 - 2:45 PM
 
 6G96GT   maybe your oil pump is on its way out? Perhaps you...   Aug 10, 2011 - 3:18 PM
 
 Needles   QUOTE (6G96GT @ Aug 10, 2011 - 3:18 ...   Aug 13, 2011 - 2:19 PM
 
 SupraKid   You should be running a oil pressure gauge, becaus...   Aug 13, 2011 - 3:19 PM
 
 Needles   i have unbolt the bolt next to the original oil pr...   Aug 14, 2011 - 3:15 PM
 
 Needles   no oil goes tru the tube i tee in the engine...
si...   Aug 15, 2011 - 1:48 PM
 
 stephen_lee   i would use the same port as the stock pressure sw...   Aug 16, 2011 - 9:23 AM
 
 Needles   its look that way, oil pump fail, im not sure but,...   Aug 16, 2011 - 1:41 PM
 
 stephen_lee   DEATHs OEM oil pump (rather the oil pump pulley) f...   Aug 16, 2011 - 4:37 PM
 
 Soulend   Oil is cold at start up and so its thick causing h...   Aug 18, 2011 - 3:25 PM
 
 stephen_lee   loooks like toyota wants >5psi at idle and 36-7...   Aug 18, 2011 - 4:46 PM
 
 Needles   after installing the gauge, its seem its all good,...   Aug 18, 2011 - 10:17 PM
 
 Delta_Phoenix   Low pressure = high flow = oil is hot and thin. OR...   Aug 20, 2011 - 11:16 PM
 
 Needles   in fact , i worked all day whit my car , (3sgte 3t...   Aug 21, 2011 - 12:43 AM![]() ![]()  | 
	
| Lo-Fi Version | Time is now: November 4th, 2025 - 10:18 AM |