Aug 19, 2011 - 4:52 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
I have a weak cold start up, but everything is fine after that, second start is okay.
I'm thinking its the AIC or something like a cold start electrical connector but IDK for sure. I checked the manual for the cold start one since the problem is always at cold start but the info is vague. any ideas? Ive dealt with it for the last 5 years since it did not give problems at all to drive just when cold start up, but its sounding sick like a low idle start up. but it gets to the correct idle rpm. This post has been edited by trdproven: Aug 19, 2011 - 4:53 PM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() |
Aug 20, 2011 - 8:16 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
this is the how-to i used when i cleaned my IAC valve. (link)
you need to remove the entire throttle body off the car, then you'll see these 4 screws on it. ![]() if you end up stripping the screws (it happened to me), you can put a flat screwdriver against one of the four notches on the head of the phillips screw and hit the screwdriver with a hammer. this allowed the screw to 'break loose' since they're on there pretty tight. -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
trdproven Weak start up Aug 19, 2011 - 4:52 PM
nics Clean the IACV or try seafoaming it. Aug 19, 2011 - 8:59 PM
trdproven Is that the one under the Throttle body, thats whe... Aug 20, 2011 - 2:55 AM
trdproven i found and removed the piece thats connected to t... Aug 20, 2011 - 4:39 AM
trdproven yup, actually realized when I started to work on i... Sep 2, 2011 - 11:05 PM
trdproven Finished doing this yesterday, idle has improvemen... Sep 5, 2011 - 6:17 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 16th, 2025 - 3:53 PM |