 oil pressure gauge, what is the normal pressure |
 Aug 10, 2011 - 2:15 PM
|
 
|
 Enthusiast  Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%)  |
my oil engine light came out whethever i puss the gas a little bit .... when im on gear and running, and goes away the second i leave the gas completly
if i put just a bit when accelerating , it will do it but sometimes flash. i dont lose and burn any oil my dipstick have correct oil in it, i did change oil and did put the excxat amount on it, so it dont need more oil why my oil light came out , ? This post has been edited by Needles: Aug 18, 2011 - 12:42 PM |
 |
Replies
|
Aug 21, 2011 - 12:43 AM
|
|
|
Enthusiast Joined Nov 18, '10 From montreal Currently Offline Reputation: 0 (0%) |
in fact , i worked all day whit my car , (3sgte 3th gen) delivery and i keep it running for 8 hour stopping it and starting it again and again,
i did get 9-13 psi at iddle at 100 degree water temp, and 65 psi when accelerating 20 to 40 psi according to less accelerating mobil 1 synthetic oil, mobil 1 oil filter 10w 30 This post has been edited by Needles: Aug 21, 2011 - 12:54 AM |
Posts in this topic
Needles oil pressure gauge Aug 10, 2011 - 2:15 PM
jordisonjr Low oil pressure? Aug 10, 2011 - 2:45 PM 6G96GT maybe your oil pump is on its way out? Perhaps you... Aug 10, 2011 - 3:18 PM
Needles QUOTE (6G96GT @ Aug 10, 2011 - 3:18 ... Aug 13, 2011 - 2:19 PM SupraKid You should be running a oil pressure gauge, becaus... Aug 13, 2011 - 3:19 PM Needles i have unbolt the bolt next to the original oil pr... Aug 14, 2011 - 3:15 PM Needles no oil goes tru the tube i tee in the engine...
si... Aug 15, 2011 - 1:48 PM stephen_lee i would use the same port as the stock pressure sw... Aug 16, 2011 - 9:23 AM Needles its look that way, oil pump fail, im not sure but,... Aug 16, 2011 - 1:41 PM stephen_lee DEATHs OEM oil pump (rather the oil pump pulley) f... Aug 16, 2011 - 4:37 PM Needles i have succesfully install the oil plug into the o... Aug 18, 2011 - 12:04 PM 6G96GT QUOTE (Needles @ Aug 18, 2011 - 12:0... Aug 19, 2011 - 7:23 PM Soulend Oil is cold at start up and so its thick causing h... Aug 18, 2011 - 3:25 PM stephen_lee loooks like toyota wants >5psi at idle and 36-7... Aug 18, 2011 - 4:46 PM Needles after installing the gauge, its seem its all good,... Aug 18, 2011 - 10:17 PM Delta_Phoenix Low pressure = high flow = oil is hot and thin. OR... Aug 20, 2011 - 11:16 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 13th, 2025 - 6:54 PM |