specifics of 3sgte block Options

[enderswift]

hey everyone,

I got into an argument today about the 3s. The people I was talking with insisted that EVERY cast iron block MUST have sleeves, because cast iron cant stand up to the conditions in a cylinder.

I said that the 3s does not have sleeves, and when I jumped on google I confirmed that fact. However, I could not find information on whether the cylinder walls are plated with a harder material. Could someone shed some light on the issue? If i remember right I saw photos of cylinder liners on someones 3s block in a thread. Do we have cylinder liners or is it just the cast block? I looked through my factory service manual and couldn't find any information either.

any input is appreciated

This post has been edited by enderswift: Aug 23, 2011 - 7:37 PM

[Soulend]

Well I know if the they were sleeved... we would know about it... because, iirc, Sleeved cylinders are PIDA. I think I had a friend with a taco with sleeved cylinders and he said its almost impossible to work with them. and i know people here have changed things with the cylinders on here.