AEM Water Methanol Injectio/ AEM F/AC I6, Going to use this a setup 4 my 3rd gen 3sgte Options

[celica95-95]

3rd Gen 3sgte going to be adding this setup looking to see what some member think

[3WayStunna]

Personally i love the kit. Pretty easy to install and not as daunting as you would think....Paid around 270ish i belive for mine (off ebay ^_^). Think the hardest part for the install was the wires..More wiring than you would think for a water injection kit.

Btw details were...boost dependent. You set when the water starts coming out, and when it stops. Of course there is the requirement that you have to install the nozzle somewhere. Favorite and most recommended places is somewhere before the butterfly valve on the throttle body, and the intercooler. I installed mine in the little rubber thingy that connects the throttlebody to the intercooler. Not a permanent solution but itll work for now... Mounted the pump and bottle in the frunk space. Drilled some holes through the cars body to mount the pump in the trunk, and right above it on the back panel for the backseat i mounted the bottle....

Also you will need to run some vacuum hose from somwhere on the intake manifold to the control unit to setup the boost dependent thing. The bottle comes with a low level sensor, and a one way inline filter as well.

So i take it you are considering buying one of these kits, lol...