 JDM Tachometer Installation, from ST205 Gauge Cluster |
 Aug 31, 2011 - 8:37 AM
|
 
|
 Enthusiast  Joined Feb 7, '03 From Northern Virginia Currently Offline Reputation: 23 (100%)  |
Before
 Removed cluster from dash, then removed screws on top left  Popped out clear plastic by pushing clear tabs.  Removed black bezel  Have 2 pieces off the cluster  removed 3 screws around the black box directly behind the tachometer  side by side view  usdm tach rear circuit board...  ...is the same as the jdm tach rear circuit board.  new brake / (!) light.  After 
This post has been edited by purplegt4: Jul 7, 2014 - 10:53 PM |
 |
Replies
|
Sep 7, 2011 - 7:05 PM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
So let me get this straight, so this mod is purely aesthetic? Obviously it doesn't increase the revs to 9k
 , but will the needle still function at the same rate as it would on the USDM tach?Edit: Because if it is just aesthetic, and the needle will function at exactly the same rate as before, I may snag your tach, Cuts. This post has been edited by HectortheRican: Sep 7, 2011 - 7:06 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Sep 9, 2011 - 4:09 PM
|
|
|
Enthusiast Joined Feb 7, '03 From Northern Virginia Currently Offline Reputation: 23 (100%) |
QUOTE (HectortheRican @ Sep 7, 2011 - 8:05 PM)  So let me get this straight, so this mod is purely aesthetic? Obviously it doesn't increase the revs to 9k this came from my clip. it just adds a 9 and the needle no longer goes into the red. QUOTE (FORGMANN @ Sep 8, 2011 - 12:54 AM) I sold him the tach pictured.. its is a non beams tach I think that was a looonnnggg time ago! haha I sold that old cluster. |
Posts in this topic
purplegt4 JDM Tachometer Installation Aug 31, 2011 - 8:37 AM
Fate very nice. i was actually just thinking tonight t... Sep 7, 2011 - 12:25 AM BonzaiCelica very simple and effective thanks. Sep 7, 2011 - 12:55 AM Cuts_the_Pilot I think i still have my stock dials left if someon... Sep 7, 2011 - 2:17 AM
Cuts_the_Pilot Sorry dude the dials are spoken for. You are curre... Sep 7, 2011 - 7:16 PM Fate They're mine! Cuts lets make this happen Sep 7, 2011 - 10:48 PM FORGMANN I sold him the tach pictured.. its is a non beams ... Sep 7, 2011 - 11:54 PM NYp8tBaller07 you should get some LED's for the cherry on to... Sep 9, 2011 - 3:30 PM 1soljaslim5 do you know if i can do that from a st202 cluster ... Mar 29, 2013 - 3:43 AM
msk59 Sorry to resurrect an old thread but cannot see pi... Jul 6, 2014 - 8:10 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 27th, 2025 - 1:58 PM |