Installing headers on 95 Celica GT Options

[6thcelestial]

I need to get advice on putting headers on my 95 GT. Never done this before, but guessing that it is a matter of just removing the old exhaust manifold , and reconnecting the new header up to the exhaust, and bolting it back in. Any advice would be greatly appreciated. I can't drop a lot of cash, but would like to get the best quality I can for the money. Any suggestions on brand, and who to order from would really help too. Also need to know if I need to do a lot of work under the car, or can most be done right under the hood. Thanks in advance.

[matts94celica]

Check out the info section there's a how-to on installing header on 7afe. And I figure the 5sfe wouldn't be much different from the 7afe. Its real easy you just need some stuff like wd-40 and let the engine cool and soak the nuts om the head to the exh. Mani. And then on the second piece soak the nuts with it and just work at it. I did my whole exhaust in a day. I removed my whole exhaust and rewelded new pipe in most spots and I put tip on to. Its easy if you have the resources available. Good luck modding your celi.
-Matt

EDIT: as far as the underneath(idk if that's spelled right) or on top of car its about half and half. If you have car ramps they'll help a lot. But a floor jack and a couple jack stands will be ok.

This post has been edited by matts94celica: Sep 24, 2011 - 5:07 AM