![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) ![]() |
I was doing a reserch and apparently 4runner brakes with 4 pistons (non sport) version fits on a gt front rotors, And the sport version fits gt4 rotors. I think the brakes have to come off from a 95-02 3rd gen 4runners and will bolt on perfectly with no modifications.
Now my question is if they fit proportional valve needs to be modified? Becsuse it will be pusshing 4 pistons instead of 1. If anyone has more info about this please post it here. This post has been edited by diegohiga: Sep 25, 2011 - 1:20 PM -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) ![]() |
brakes will fit, no questions about that
my question is, are you willing to try ? meaning, actually install and get them to work, you need to take some basic measurements and find a disc that will suit this new caliper, I don't think stock GT disc will be big enough for these calipers, 4runner comes stock with 16 inches wheels, and 17 inches on the sport version. which would point to the disc being the biggest they can fit behind the wheel. it shouldn't be any harder than GT4 brakes and for a fraction of the cost, and the best part the amount of piston and most likely around the same diameter of disc. it's definitely worth a shot, we just need someone to bite the bullet and try it, I mentioned this upgrades over a year ago but I already have Gt4 brakes so I wont be the one to try it. -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 6:59 AM |