 master to slave |
 Sep 22, 2011 - 11:26 PM
|
 
|
 Enthusiast  Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%)  |
here is a question... I dont have a hard line for the master cylinder I installed for the clutch.. whats can i safely use to run from there to the slave on the transmission ????
-------------------- Always fast and going for the look......
 |
 |
Replies
|
Sep 29, 2011 - 7:13 AM
|
|
 Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
when I did mine I used my ST205 slave and lines, exactly because I was having issues finding the right hose for the stupid mr2 connection.
you can go to autozone and order a camry V6 manual trans slave and the line from the dealer, or maybe someone has a used one from the ST205 clip / engine set. Good luck --------------------  |
Posts in this topic
timdog1720 master to slave Sep 22, 2011 - 11:26 PM
Stambo your going to need a rubber line or stainless line... Sep 22, 2011 - 11:40 PM Smaay you shouldn't have to open the system at all. ... Sep 26, 2011 - 10:45 AM bsamps4 you should just buy the hard line from toyota Sep 26, 2011 - 8:56 PM
Batman722 QUOTE (bsamps4 @ Sep 26, 2011 - 9:56... Sep 26, 2011 - 9:10 PM timdog1720 Okay suggestions ... wich one the hard line part o... Sep 26, 2011 - 9:46 PM Batman722 clutch hard line #31481-20750
the rubber line #90... Sep 26, 2011 - 10:31 PM timdog1720 ok but heres the thing i have a mr2 tranny the e15... Sep 26, 2011 - 11:59 PM Batman722 I don't understand. Sep 27, 2011 - 8:48 AM timdog1720 QUOTE (Batman722 @ Sep 27, 2011 - 9... Sep 27, 2011 - 8:58 PM timdog1720 bump Sep 29, 2011 - 1:00 AM toyotatech3 RE: master to slave Sep 29, 2011 - 9:33 AM trdproven you can just buy compatible hard lines at Napa and... Sep 29, 2011 - 6:54 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 10th, 2025 - 10:21 AM |