Oct 4, 2011 - 12:51 PM
|
|
|
Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
Can anyone give any ideas what can be done to get this car over the edge in Cali. I haven't tuned it up since last year but just changed the oil.
Thanks. Mabey a tune up would do it even though it feels like it is running better than ever.
This post has been edited by xrav22: Oct 12, 2011 - 3:20 PM |
![]() |
Oct 4, 2011 - 1:36 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
you need a new O2 sensor, and or a new catalytic converter
that's the only way you can lower NOx ( assuming there is no mechanical issues ) -------------------- ![]() |
Oct 12, 2011 - 10:47 AM
|
|
|
Enthusiast ![]() ![]() Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
you need a new O2 sensor, and or a new catalytic converter that's the only way you can lower NOx ( assuming there is no mechanical issues ) I changed the o2 sensors. One tip is soak the bottom one in PB for at least 6 hours before trying to remove it because it won't budge. Spray a few times even better and drive, park,drive again. Then it finally broke loose. My new question is I unhooked the battery and small neg lead for about 30 seconds my car clock was not set anymore but my radio did not loose memory(usually I have to reset stations). Would this be enough for the computer to reset and do I need to reset to get the new sensors to adjust? The old sensors were very corroded and I don't think they were working properly. I want to go back to smog asap. Thanks in advance. Now that I think about it I should have pulld both leads off not just neg terminal. Probably another ground somewhere. This post has been edited by xrav22: Oct 12, 2011 - 12:43 PM |
xrav22 any smog experts or ideas Oct 4, 2011 - 12:51 PM
Smaay your CAT is toast! i had the same reading on m... Oct 4, 2011 - 1:34 PM
xrav22 QUOTE (Smaay @ Oct 4, 2011 - 2:34 PM... Oct 4, 2011 - 1:43 PM
stephen_lee pull efi fuse in the engine bay fuse box. wont hav... Oct 12, 2011 - 1:27 PM
xrav22 QUOTE (stephen_lee @ Oct 12, 2011 - 1... Oct 12, 2011 - 3:19 PM
stephen_lee QUOTE (xrav22 @ Oct 12, 2011 - 3:19 ... Oct 12, 2011 - 4:02 PM
xrav22 QUOTE (stephen_lee @ Oct 12, 2011 - 5... Oct 12, 2011 - 4:31 PM
stephen_lee Its the EFI FUSE, not the relay. Engine bay main f... Oct 13, 2011 - 8:43 AM
xrav22 QUOTE (stephen_lee @ Oct 13, 2011 - 8... Oct 13, 2011 - 10:47 AM
Culpable04 looking at the numbers ( 455 ) you also need a new... Oct 13, 2011 - 11:17 AM![]() ![]() |
| Lo-Fi Version | Time is now: December 6th, 2025 - 1:47 PM |