Nov 26, 2011 - 12:14 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Mar 8, '09 From Westport, MA Currently Offline Reputation: 6 (100%) |
hey guys i need some advice here, im running a Stage 4 Comp 6 puck sprung clutch and it catches very low ever since it was installed after i did my swap. now that the car is off the road i have a lil more time to pluck away at the small issues that need to be delt with.
ive tried to bleed the clutch several times and it still catches low, (right at the floor) literally.. i have the clutch held to the floor and i lift not even half an inch and it grabs, is it supposed to be like that? is that just how this clutch is? the clutch itself is fine, i checked it when i replaced my tranny after a 1000miles on the swap lol. the clutch engages and shifts properly its just very low and its annouying at times espically when in traffic. any advice or other options would be helpful, thank you -------------------- st205 powered ss3 coupe
|
![]() |
Nov 27, 2011 - 9:37 AM
|
|
|
Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
make sure the clutch is completely broken in, then adjust the pedal. (there is a setup under there to adjust where the pedal catches.
-------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
Ted95 Clutch Adjustment?? Nov 26, 2011 - 12:14 PM
bsamps4 ^^Like Manny said, and here is how to do it. Nov 27, 2011 - 9:47 AM
Ted95 thats what im going to have to do, i was trying to... Nov 27, 2011 - 11:21 PM
Smaay personally i like having the clutch grab right off... Nov 28, 2011 - 11:13 AM
Ted95 QUOTE (Smaay @ Nov 28, 2011 - 11:13 ... Nov 29, 2011 - 4:00 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 9th, 2025 - 5:52 PM |