![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jul 16, '05 From Vancouver, BC Area Currently Offline Reputation: 2 (100%) ![]() |
Hey there....lately, every so often, I turn the key and the lights go on, but the engine doesn't start, or even budge (the starter isn't moving). After a random number of repetitions turning the key, the car starts (it's always less than 10 tries).
Everything else is perfectly fine. What gives? |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Aug 31, '02 From KC Currently Offline Reputation: 0 (0%) ![]() |
Ironically, My Harley also had a Denso starter and the exact same problems, on the good side, it's about all that ever goes wrong with these starters.
EDIT: FWIW, the ones in the video are not all that worn, my wife's were bad enough they were about a 3rd as thick as the new ones. The Harley literally had no contact left, just about an eighth of an inch at 1 end of the battery side still making contact, and it was paper thin, the rest was gone. the plunger was bottoming out in both causing a poor to no connection across the solenoid, then the contacts tended to arc and burn up even faster. I did not use a new plunger in either, but maybe should have, at least in the bike. Toyota also has the plunger kit separate This post has been edited by 97GTinKC: Dec 6, 2011 - 3:39 PM |
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 10:00 AM |