![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Sep 28, '03 From Bloomington, IN Currently Offline Reputation: 0 (0%) ![]() |
So i'm trying to rip apart my interior and get my heater core out. And it's not going well. So if you've done this heater core project please AIM me at Raziel215. I'm having trouble getting the glove compartment and and dash out. Also if you have a service manual and you could scan the directions, that'd rock. My Hilton's service manual is less then helpful on this project. Thanks.
-------------------- NASA/SCCA RX-7....currently under the knife
92 Civic hatch B16 - Sold 10th anniv RX-7 - RIP The Slow Celica - Sold...and then crushed crushed due to street racing. Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!" |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 22, '02 From Detroit Currently Offline Reputation: 0 (0%) ![]() |
The A/C controls aren't too bad to take out. If you reach around to where the ECU is on the drivers side, one of the wires that keep it from coming out is attached there and easy to take off. That should give you enough play to see how to remove the other wire. Hope this helps. It's one of those things like the passenger air vent that are hard as heck untill you've done it a couple times, then it's simple.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 2:44 PM |