 Australian swaps |
 Nov 21, 2011 - 8:17 PM
|
 
|
|
Enthusiast  Joined Sep 30, '11 From Sydney Currently Offline Reputation: 0 (0%)  |
As the title says, has anyone in Australia ever completed a swap?
I was considering it but couldn't find any importers that looked decent and looking at the RTA specifications you would need to convert brakes, suspension, steering and the works to get it registered and knowing the laws prob a mandatory AWD conversion too. In the end it would be worth hunting down 1 of the 77 GT4's and buying that. Also, the NSW laws don't permit a 5sfte to be used on the road because of some stupid law that says if the engine did not come standard as a turbo it can only be used on the track if it gets a turbo added. Although im sure there must be a loop hole there since i'm sure i've seen alot of random turboed cars around. Cheers. |
 |
Replies
|
Dec 16, 2011 - 6:53 AM
|
|
 Enthusiast Joined May 11, '10 From Australia Currently Offline Reputation: 2 (100%) |
I recently completed my 3rd Gen 3SGTE swap. I cant exactly remember where I purchased my cut from (some place from Revesby). But there is another place that Ive bought parts from and they are good. The place is Ichiban (http://www.ichiban.com.au/) give them a call as their website is not always up to date.
I also got my car engineered by Col Potts (Col Potts Engineering Pty Ltd) He is authorised by the RTA. He is really easy going. The inspection for my car only took 30mins, and he even told me i didn't need to upgrade my brakes just gets good brake pads (but i had already done the brakes). I hope this info helps 
|
|
Dec 18, 2011 - 11:13 PM
|
|
 Enthusiast Joined Mar 25, '05 From Sydney, Australia Currently Offline Reputation: 0 (0%) |
QUOTE (PL-41-ER @ Dec 16, 2011 - 9:53 PM)  I recently completed my 3rd Gen 3SGTE swap. I cant exactly remember where I purchased my cut from (some place from Revesby). But there is another place that Ive bought parts from and they are good. The place is Ichiban (http://www.ichiban.com.au/) give them a call as their website is not always up to date. I also got my car engineered by Col Potts (Col Potts Engineering Pty Ltd) He is authorised by the RTA. He is really easy going. The inspection for my car only took 30mins, and he even told me i didn't need to upgrade my brakes just gets good brake pads (but i had already done the brakes). I hope this info helps was the halfcut a dark blue/greeny colour? --------------------  98 ST204 ZR - Black Beauty - Roaming the streets of Sydney 73 TA22 LT - Tiffany Blue - Mint Classic Weekend Cruiser 75 TA22 LT - Snow White - Mint Classic Weekend Cruiser 77 RA28 LT - Flubber Green - Mint Classic Weekend Cruiser 94 MX-5 NA8 Clubman - Red Racer - Looking for corners WIP Project: 69 RT40 Corona, 2nd WIP Project: 66 RT40 1600s Corona 86 Corona RT142 - Daily Driver 6GC 4 Life Baby!!! |
Posts in this topic
UVZ164 Australian swaps Nov 21, 2011 - 8:17 PM
Timmyface Well from my understanding, you can't do much ... Nov 21, 2011 - 9:13 PM Grega You have one from USA here on ebay, but I don... Nov 22, 2011 - 2:46 AM UVZ164 There are hundreds of motors and clips on ebay tha... Nov 22, 2011 - 9:46 AM Neon90424 cant you just get that stuff from japan? Nov 22, 2011 - 10:02 AM Grega QUOTE (UVZ164 @ Nov 22, 2011 - 3:46 ... Nov 22, 2011 - 12:18 PM mikegt Trusting someone who is thousands of miles away is... Nov 22, 2011 - 1:56 PM CelicaZR there is a few place that have 3sgte clip in sydne... Nov 22, 2011 - 4:37 PM UVZ164 Do you by any chance know where in sydney they can... Nov 22, 2011 - 6:38 PM CelicaZR yea i found one at girraween a few months ago. Nov 22, 2011 - 9:07 PM Neon90424 If my memory serves me right there was one of the ... Nov 22, 2011 - 10:00 PM S8S8 There are loads of importers here in Australia whe... Nov 25, 2011 - 2:27 AM UVZ164 Hey S8S8, do you know any decent ones? if you do m... Nov 26, 2011 - 8:28 AM S8S8 I got mine from Rollin Automotive Imports. You ca... Dec 15, 2011 - 4:05 PM PL-41-ER Yeh it was a dark bluish colour, how did you know ... Dec 19, 2011 - 10:43 PM
CelicaZR QUOTE (PL-41-ER @ Dec 20, 2011 ... Dec 20, 2011 - 6:24 AM Cuts_the_Pilot There is a fair few swapped 5th and 6th gens, and ... Dec 20, 2011 - 4:35 AM PL-41-ER Yeh it was Autobase haha.
I still have to make a c... Dec 20, 2011 - 6:48 AM ST204R if you're worried about turbos, why not go the... Jan 15, 2012 - 5:19 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 19th, 2025 - 1:46 AM |