 St202 LSD Tranny on 3sgte 3rd gen FWD swap |
 Jan 6, 2012 - 9:27 PM
|
 
|
|
Enthusiast  Joined Aug 4, '06 From Toronto Currently Offline Reputation: 0 (0%)  |
Hey guys looking for some info on St202 beams tranny Looking to put in my 3sgte 3rd Fwd swap for the use of the LSD ,
I know that it will bolt up , and Axle should be the same , Would the clutch be the same As the 5sfe tranny — this is what i'am running on my swap I thinking it should bolt up and work , but just looking to get some info thanks for the help ! |
 |
Replies
|
Jan 8, 2012 - 3:24 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Yeah, those axles will fit just fine. I can't say much about power though. I've read that the S54 and the axles both are good up to about 300 whp. After that, an E153 is geared much better.
Was it just the axles that didn't work so well above 80 or the trans? Mine is great all the way up to 116 mph where the ECU shuts the car down but I don't have near the power you do. As for the clutch, you're good on the 3S flywheel but you'll need a good 5S disc and 3S pressure plate. Brand/stage is up to you. I'd lean more towards the MR2/ST205 clutch than the ST202. I'm not sure of the power ratings on any of them but I'm sure the ST205 clutch can handle a lot more than an ST202 clutch. -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Posts in this topic
celica95-95 St202 LSD Tranny on 3sgte 3rd gen FWD swap Jan 6, 2012 - 9:27 PM
Smaay no the E153 has a larger spline. Jan 7, 2012 - 8:51 PM richee3 No. You'll need a 3S flywheel and pressure pla... Jan 8, 2012 - 10:02 AM celica95-95 Cool thanks right now i have 3s flywheel with a st... Jan 8, 2012 - 11:06 AM
richee3 QUOTE (celica95-95 @ Jan 8, 2012 - ... Jan 8, 2012 - 11:54 AM celica95-95 great thanks ! The axle I have are from st204 ... Jan 8, 2012 - 12:43 PM Smaay actually its just the center section. this is what... Jan 8, 2012 - 8:13 PM richee3 I'm confused... As I understand it, He has a 3... Jan 8, 2012 - 8:46 PM celica95-95 Thanks for info smaay , richee3 got it right looki... Jan 8, 2012 - 9:42 PM richee3 If you currently have an S54, then you won't e... Jan 8, 2012 - 10:42 PM celica95-95 yea i dont know if it would do the same in 5th gea... Jan 8, 2012 - 11:01 PM celica95-95 So i have been looking at BEAMS transmission how d... Jan 20, 2012 - 2:45 PM richee3 The easiest way to tell is to look where the axles... Jan 21, 2012 - 4:29 PM Smaay QUOTE (richee3 @ Jan 21, 2012 - 1:29... Feb 19, 2012 - 12:25 AM purplegt4 QUOTE (richee3 @ Jan 21, 2012 - 1:29... Mar 26, 2012 - 2:18 PM celica95-95 Great man thanks , how does the transmission you h... Jan 21, 2012 - 6:20 PM richee3 QUOTE (celica95-95 @ Jan 21, 2012 ... Jan 21, 2012 - 6:43 PM celica95-95 Yea thanks for that post too , I check that e-bay ... Jan 21, 2012 - 8:08 PM richee3 Motor and trans for $700 or just the trans? E... Jan 21, 2012 - 10:52 PM celica95-95 Trans 700 only no motor , I still got to check ... Jan 22, 2012 - 8:13 PM Ghost1 Where did u manage to find 1, i am looking for 1 m... Feb 18, 2012 - 12:19 AM celica95-95 QUOTE (Ghost1 @ Feb 18, 2012 - 12:19... Feb 23, 2012 - 5:55 PM Ghost1 i would buy that tranny in a hard beat. if i could... Feb 23, 2012 - 6:24 PM celica95-95 QUOTE (Ghost1 @ Feb 23, 2012 - 6:24 ... Feb 23, 2012 - 7:29 PM BonzaiCelica The test I did with my helical lsd is as follows :... Mar 30, 2012 - 4:17 PM richee3 My open diff did that too. Not really a good test. Mar 30, 2012 - 4:42 PM BonzaiCelica QUOTE (richee3 @ Mar 30, 2012 - 4:42... Mar 30, 2012 - 5:18 PM richee3 You can definitely feel the difference there. I wa... Mar 30, 2012 - 5:39 PM BonzaiCelica in need of a clutch kit for the 3SGE Beams motor. ... Apr 30, 2012 - 4:08 PM richee3 BEAMS clutch disc and ST185 pressure plate. Part n... Apr 30, 2012 - 5:29 PM BonzaiCelica QUOTE (richee3 @ Apr 30, 2012 - 5:29... Apr 30, 2012 - 7:23 PM richee3 I would imagine the disc can handle it but there a... Apr 30, 2012 - 8:02 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 2:49 PM |