Jan 10, 2012 - 1:54 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
I installed 8 inch subs in my doors an of course they rattle like crazy now
Would that stick on sound deadner help or does anyone have a low Buck solution to the problem Thanks in advance -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
![]() |
Jan 11, 2012 - 9:17 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
x2 on finding out what exactly is making the noise.
if you press against the door panel from the inside, does it still rattle? i found mine rattled along the top of the door panel. the metal piece that extends along the top of the interior door panel that hooks onto the metal door frame, well that so-called hook piece widens over time as you close the door shut. it just needed to be bent back tighter to secure the panel on the door frame. otherwise, other common sources for vibration on the door is the door handle (just bend the bracket that secures the 10mm bolt further inwards) and the plastic pivot on the metal door panel that connects the mechanical rods for the latch and manual door lock (a thick piece of foam padding kept it pressed between the door panel and metal door frame). my doors didn't rattle after that even on the highest volume. This post has been edited by azian_advanced: Jan 11, 2012 - 9:18 PM -------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
kurt95gt installed door subs an doors rattle Jan 10, 2012 - 1:54 AM
SupraKid Depends what is rattling..Figure that out haha. My... Jan 11, 2012 - 9:04 PM
kurt95gt Lol thanks honestly it seems like it's the who... Jan 11, 2012 - 9:13 PM
kurt95gt Ok so going through an making sure everything is g... Jan 11, 2012 - 10:48 PM
Cuts_the_Pilot Go to a car audio place and buy some dynamat, i... Jan 12, 2012 - 3:03 AM
kurt95gt OK
I'll try to pick some up soon
I didn... Jan 12, 2012 - 10:22 AM
mkernz22 QUOTE (kurt95gt @ Jan 12, 2012 - 10... Jan 12, 2012 - 2:27 PM
rave2n QUOTE (mkernz22 @ Jan 12, 2012 - 3:2... Jan 12, 2012 - 5:33 PM
kurt95gt that's probably what ill be doing for awhile Jan 12, 2012 - 7:17 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 18th, 2026 - 7:46 PM |