 Gears only shift when car is off |
 Jan 27, 2012 - 7:49 PM
|
 
|
|
Enthusiast  Joined Jun 4, '10 From Jax Beach, FL Currently Offline Reputation: 0 (0%)  |
I have a 95 Celica GT just under 200k. It had problems downshifting before, but I had replaced the gear oil and everything was smooth again. Today I stopped at a light and the car wouldnt shift into first...or second or anything. I turned the car off switched it into first then I was able to get it into second, but it wouldnt go any further or back to first. I had to drive home in second with my hazzard lights on. Luckily I was a mile away from home. The clutch seems like it is still strong. Could this be the pressure plate or something similar?
|
 |
Replies
|
Jan 30, 2012 - 1:16 PM
|
|
|
Enthusiast Joined Mar 1, '10 From TX Currently Offline Reputation: 16 (90%) |
i managed to get the rear mount off without dropping the crossmember. i think under the cross member theres a little plastic cover that exposes the nuts that hold the bracket that houses the rear mount. i removed those as well as the front and tranny mount then just jacked the motor up till i could remove it.
also for prying out the the drivers axle a shift fork fit it perfectly for me. i think theres you tube vids of this. if you wreck them or their super old replace those axle seals while your down there i think their 11 bucks/each from toyota -jec -------------------- JN 3:16
-------------------------------------- |
Posts in this topic
m2736185 Gears only shift when car is off Jan 27, 2012 - 7:49 PM
Stambo possibly the clutch itself is dragging on the flyw... Jan 27, 2012 - 8:06 PM m2736185 Nope, the clutch comes right back when I release i... Jan 27, 2012 - 8:23 PM Bitter clutch isn't disengaging for some reason, got ... Jan 27, 2012 - 9:12 PM 96stgreendemon I had this problem too. There is an adjustment on ... Jan 27, 2012 - 10:02 PM Neon90424 does your clutch pedal vibrate when you push it do... Jan 27, 2012 - 10:10 PM m2736185 Yes there is fluid in there. I tried to move it it... Jan 27, 2012 - 10:24 PM RabidTRD A bad throwout bearing will do that. Did it to my ... Jan 27, 2012 - 11:14 PM JasonTX had a very similar problem. a spring on my clutch ... Jan 27, 2012 - 11:17 PM m2736185 Either way....it looks like everyone is saying its... Jan 28, 2012 - 12:12 AM JasonTX pretty good walkthroughs on the site. very straigh... Jan 28, 2012 - 12:28 AM RabidTRD Either way, it's not going to hurt to put a ne... Jan 28, 2012 - 12:38 AM m2736185 Yea, I just wish it could have waited another thou... Jan 28, 2012 - 2:23 AM
JasonTX QUOTE (m2736185 @ Jan 28, 2012 - 3:2... Jan 28, 2012 - 11:14 AM
xrav22 QUOTE (m2736185 @ Jan 28, 2012 - 2:2... Jan 28, 2012 - 11:15 AM m2736185 Looks like I got one of those 1 day projects that ... Jan 28, 2012 - 1:04 PM Bitter if the slave is pushing the fork then the clutch h... Jan 28, 2012 - 1:46 PM xrav22 QUOTE (Bitter @ Jan 28, 2012 - 1:46 ... Jan 28, 2012 - 3:07 PM 4v6 Sounds like clutch drag.
I had the same issue on ... Jan 30, 2012 - 3:28 AM m2736185 Well, I got the undercover off so I could get a go... Jan 30, 2012 - 11:05 AM rave2n QUOTE (m2736185 @ Jan 30, 2012 - 11... Jan 30, 2012 - 11:23 AM xrav22 QUOTE (m2736185 @ Jan 30, 2012 - 11... Jan 30, 2012 - 2:54 PM m2736185 The bearing mount - mean the mounting bracket tha... Jan 30, 2012 - 11:57 AM rave2n QUOTE (m2736185 @ Jan 30, 2012 - 11... Jan 30, 2012 - 12:21 PM m2736185 Second day working on the car and surprisingly no ... Feb 1, 2012 - 6:07 PM mkernz22 Yeah, you're ABS won't work anymore since ... Feb 1, 2012 - 6:21 PM m2736185 damnit, I should have just left it on there. Maybe... Feb 1, 2012 - 6:39 PM mkernz22 it's not even worth trying to get one out of t... Feb 1, 2012 - 9:14 PM m2736185 Just got both axels out. Got the front mount out a... Feb 2, 2012 - 10:33 AM mkernz22 Yes, you need to remove the center bolt on the rea... Feb 2, 2012 - 11:15 AM m2736185 Wow, that rear mount gave me hell, but I got it ou... Feb 2, 2012 - 5:57 PM mkernz22 the middle bolt can be a pain in the a$... Feb 2, 2012 - 7:28 PM rave2n Watch out when dropping that trannie, there are al... Feb 3, 2012 - 9:19 AM mkernz22 yes, don't forget about the speed sensor. that... Feb 3, 2012 - 11:35 AM m2736185 Wahoo! I finally got the tranny off. I didnt o... Feb 3, 2012 - 2:41 PM mkernz22 do not get an f1. just get a regular OEM clutch se... Feb 3, 2012 - 3:09 PM JasonTX gonna go with mkernz22
considering your budget, f... Feb 3, 2012 - 3:57 PM m2736185 I was gonna wait until I get the new parts to take... Feb 3, 2012 - 7:40 PM Bitter leaky valve cover gasket, so common on the 5S. Feb 3, 2012 - 8:49 PM m2736185 Took the clutch off today to see if I could resurf... Feb 4, 2012 - 3:09 PM Bitter you need a flywheel.
rear main doesn't look to... Feb 4, 2012 - 4:09 PM Neon90424 I had an F1 in my 7gc...worked pretty good for me.... Feb 4, 2012 - 5:28 PM mkernz22 if you had any oil on the flywheel bolts, replace ... Feb 4, 2012 - 6:14 PM m2736185 Damnit I guess I got 2nd day delivery on the clutc... Feb 4, 2012 - 11:19 PM JasonTX rear main does not look bad. (its the rubber that ... Feb 4, 2012 - 11:29 PM mkernz22 QUOTE (JasonTX @ Feb 4, 2012 - 11:29... Feb 4, 2012 - 11:37 PM JasonTX QUOTE (mkernz22 @ Feb 5, 2012 - 12:3... Feb 5, 2012 - 12:01 AM m2736185 Does anyone know the part number for the rear main... Feb 5, 2012 - 2:23 AM m2736185 I checked the manual and I couldnt find the torque... Feb 6, 2012 - 3:39 PM m2736185 Well for anyone replacing the main seal DO NOT rem... Feb 7, 2012 - 6:34 PM rave2n Lol, did you use a jack or something to do the tra... Feb 7, 2012 - 6:46 PM m2736185 Ha I tried to use the jack at first, but I couldnt... Feb 7, 2012 - 8:43 PM m2736185 I think im done tryin to get everything to the rig... Feb 8, 2012 - 4:41 PM mkernz22 don't always go by specifications. do it until... Feb 8, 2012 - 5:29 PM m2736185 lol, yes I think im gonna use the "really tig... Feb 8, 2012 - 9:24 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 23rd, 2025 - 8:18 PM |