![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 4, '10 From Jax Beach, FL Currently Offline Reputation: 0 (0%) ![]() |
I have a 95 Celica GT just under 200k. It had problems downshifting before, but I had replaced the gear oil and everything was smooth again. Today I stopped at a light and the car wouldnt shift into first...or second or anything. I turned the car off switched it into first then I was able to get it into second, but it wouldnt go any further or back to first. I had to drive home in second with my hazzard lights on. Luckily I was a mile away from home. The clutch seems like it is still strong. Could this be the pressure plate or something similar?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) ![]() |
it's not even worth trying to get one out of the junkyard, it's going to break as well. Plus you'll need to take the axle out of the knuckle to pop the rest of the sensor out. here's a link on removing the drivers side, there's just the 2 bolts on the back side of the engine for the carrier bracket, on the passenger axle
|
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 10:29 AM |