You know what SUCKS about custom paint? Options

[Fastbird]

You can't fix THIS:





*edit* That's NOT, I repeat NOT, a hole in the splitter. It's just deep into the fiberglass. My HTC Rezound was used for these pics, and I couldn't control the flash well enough to get a real clear shot of the damage.

This is why the splitters have been off the front of the car. This one took a hit at some point while I was gone last year, or while putting it on the trailer to move it from IL to PA......I'm not exactly sure but I have my suspicions. But, in any case, the shop that did my paint, the owner retired, and the person I've talked with has no clue this was a custom mix, and quoted me at like $550 to paint just these two pieces (which is stupid expensive) with using some off the shelf paint he has. No dice for me, so I'm going to have to try to fix on my own.

The plan is to find the closest match I can, fill in the recess, paint, and clear........and hope it's close. The good news is that the defect is on the bottom of the splitter at least, but you can still see it from the front.

This is why I do NOT like daily driving this car.

This post has been edited by Fastbird: Feb 4, 2012 - 11:55 AM

[cheela]

This is why I do NOT like daily driving this car.

EXACTLY!!!



This post has been edited by cheela: Feb 4, 2012 - 5:15 PM