![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
So I'm going to be wiring up my fogs soon and what I'm planning to do is just reroute the wires to the sidemarker and send those straight to the fog lights and to splice in the sidemarkers to the turn signal's wires so they'll both blink.
Basically what I'm worried about is: Is this feasible? Will I be blowing fuses? Any input is appreciated. This post has been edited by HectortheRican: Aug 8, 2012 - 6:43 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) ![]() |
I'm confused. You're going to use your tiny low power wires from the sidemarkers for your fog lights? I would personally run new wires from the fuse box but that's just me. Seems like going from a 4 watt bulb to a 55 watt bulb on the same wire runs the risk of melting wires.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() ![]() |
Lo-Fi Version | Time is now: August 22nd, 2025 - 2:05 PM |