 7A-FE ITB Project |
 Jan 24, 2012 - 4:46 PM
|
 
|
|
Enthusiast Joined Nov 16, '09 From Bulgaria Currently Offline Reputation: 0 (0%)  |
I'm Starting Individual throttle bodies project on the 7afe.I'll be putting CBR954RR throttle bodies witch have 40mm inlet on the vacuumed side witch line up fairly good with the Stock 7afe intake manifold. The throttle bodies go from 44mm on the trumpet side to 40mm in the vacuum, witch i think will make good air velocity for the stock FE head.
I intend to make a vacuum box to collect the vacuum from the ITB's and spread them in the bigger hoses for brake,map sensor,Fuel pressure regulator and etc(I have yet to figure out all the detail). I will be using 315cc Supra injector witch i've tested with the stock manifold(And it goes way rich). What has been done so far is that I've cut the stock intake(Which i've got from the junkyard) and tomorrow i will see where exactly will they match up. I intend to use the stock 7afe injector fuel rail and mount the itb's after it. Tomorrow ITB lining and cutting a bit more if needed. Ah and forgot i will be using stock 7afe map sensor, TPS sensor and cbr1000rr manual idle air controller. If anybody is interested in this I'll be happy to see your opinion. I hope I make all clear tomorrow I'll make some good pics on all parts so far and all i intend to do  . See how this works out.
|
 |
Replies
|
Feb 5, 2012 - 4:33 AM
|
|
|
Enthusiast Joined Nov 16, '09 From Bulgaria Currently Offline Reputation: 0 (0%) |
and guys what that vacuum line for coming from the valve cover next to the PCV valve and going to the intake?
|
|
Feb 5, 2012 - 10:57 AM
|
|
|
Enthusiast  Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
QUOTE (morag @ Feb 5, 2012 - 3:33 AM)  and guys what that vacuum line for coming from the valve cover next to the PCV valve and going to the intake? those are breather tubes, they can go into a catch can with filters. What are you tuning with? Nothing right now, you'll probably want a stand-alone. Where is your MAP sensor reading vacuum from? You should have it on a small bottle so it has a steadier source, each intake pulse is probably screwing with the reading. How bad does vacuum bounce around at it? How much does it's voltage fluctuate How much vacuum are you pulling in your 'bottle'? Is it steady vacuum? You should really have two bottles. One small one for the MAP sensor (assuming it has steady vacuum) and another for accessories with a check valve to hold vac at higher throttle so the brake booster etc have steady vacuum source. This post has been edited by Bitter: Feb 5, 2012 - 10:59 AM -------------------- |
Posts in this topic
morag 7A-FE ITB Project Jan 24, 2012 - 4:46 PM
bsamps4 Sounds freaking awesome man!
Pet Peeve... wit... Jan 24, 2012 - 5:11 PM Bitter but the steep angle of the ports inside the head w... Jan 24, 2012 - 7:51 PM morag I don't think so. In fact i think steep angle ... Jan 25, 2012 - 5:38 AM Bitter Are you going to atleast run some longer duration ... Jan 25, 2012 - 8:39 AM Smaay dude that thing is going to be freaking loud!... Jan 25, 2012 - 5:00 PM RobbMeeX Will need pics/videos. Jan 25, 2012 - 11:56 PM morag This is a low budget build so no cam's YET.I... Jan 26, 2012 - 6:08 AM morag here's whats up so far.next step TPS sensor pl... Jan 27, 2012 - 4:57 PM kurt95gt Thats gonna look bada$$ Jan 27, 2012 - 11:54 PM morag so m8's here's the progress ITB's are ... Feb 2, 2012 - 2:57 PM celica-s i've always wanted to this. there are ITB... Feb 3, 2012 - 1:00 AM morag the thing is that you don't need larger then 4... Feb 3, 2012 - 4:34 AM dakotahwyatt I bet that will sound real good when its done Feb 3, 2012 - 2:00 PM Smaay please get a better camera Feb 4, 2012 - 12:06 AM
Syaoran QUOTE (Smaay @ Feb 4, 2012 - 1:06 AM... Feb 4, 2012 - 12:49 AM kurt95gt Hell my phone takes better pics than that Feb 4, 2012 - 1:13 AM smkr3w Lookin good. Cant wait for a vid/sound clip once i... Feb 4, 2012 - 4:36 AM morag It's actualy a phone camera .And the thing is ... Feb 4, 2012 - 5:42 AM mandrek curious to see how well this will work, and how mu... Feb 4, 2012 - 6:14 AM mandrek oh, and i must say, i LOVE the vacume tank. Feb 4, 2012 - 6:26 AM morag Guys here's the case. . I suspect something is... Feb 4, 2012 - 1:27 PM smkr3w QUOTE (morag @ Feb 4, 2012 - 1:27 PM... Feb 4, 2012 - 2:33 PM Bitter your injectors are WAY to big and you have no way ... Feb 4, 2012 - 6:56 PM morag the map sensor reading is from a separate vacuum h... Feb 5, 2012 - 4:11 AM morag the map sensor is on a separate vacuum coming from... Feb 5, 2012 - 3:51 PM Bitter You will probably only need injectors slightly lar... Feb 5, 2012 - 10:50 PM morag That's what intend to do! Something like B... Feb 6, 2012 - 6:31 AM celica74 a $50 vacuum manifold would probly work best.... Sep 6, 2012 - 6:50 PM Special_Edy One common misconception Ive read here is that itb... Sep 7, 2012 - 8:26 AM Special_Edy Oh and set every throttlebody the same. The simple... Sep 7, 2012 - 9:29 AM Bitter QUOTE (Special_Edy @ Sep 7, 2012 - 9... Sep 8, 2012 - 6:40 PM Special_Edy QUOTE (Bitter @ Sep 8, 2012 - 6:40 P... Sep 9, 2012 - 10:55 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 10:07 AM |