 Kouki Projectors Question |
 Feb 8, 2012 - 10:11 AM
|
 
|
|
Enthusiast  Joined Jan 24, '12 From Maryland Currently Offline Reputation: 2 (100%)  |
Done some research on these but couldn't find the info I was looking for so I'm asking the community for help.
1. To my understanding the USDM low beam bulbs do not fit the projectors (9006 to H4? I think?) so as far as wiring goes do I just take the old wiring off and just resolder to the new ones or do I need a resistor or something in between to get the current down? 2. Does the high beam bulbs the same between USDM and projectors? Thanks -Dave |
 |
Replies
|
Feb 8, 2012 - 11:01 AM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
You just buy two halves of the harness and make it yourself. Mine cost $8 total. Or you can do what smkr3w suggested and buy an HID kit that will plug into a 9006 harness and allow an H1 bulb. Not all kits will do this though- my DDM kit requires that the H1 bulb plugs into the car's harness so I had to make the wiring harness.
As for the plug and play harness, search eBay for a 9006 heavy duty harness. Then your projectors may come with H1 pigtails or you might have to go to any local auto parts store and pick them up, but they don't cost very much. Cut the 9006 heavy duty harness in half, keep the female plugs, and splice them in with the H1 plugs and voila, plug and play harness done! -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Feb 8, 2012 - 11:04 AM
|
|
|
Enthusiast Joined Jan 24, '12 From Maryland Currently Offline Reputation: 2 (100%) |
QUOTE (richee3 @ Feb 8, 2012 - 11:01 AM)  You just buy two halves of the harness and make it yourself. Mine cost $8 total. Or you can do what smkr3w suggested and buy an HID kit that will plug into a 9006 harness and allow an H1 bulb. Not all kits will do this though- my DDM kit requires that the H1 bulb plugs into the car's harness so I had to make the wiring harness. As for the plug and play harness, search eBay for a 9006 heavy duty harness. Then your projectors may come with H1 pigtails or you might have to go to any local auto parts store and pick them up, but they don't cost very much. Cut the 9006 heavy duty harness in half, keep the female plugs, and splice them in with the H1 plugs and voila, plug and play harness done! Great! Thanks for the info. -Dave |
Posts in this topic
mechedjun Kouki Projectors Question Feb 8, 2012 - 10:11 AM
richee3 High beam bulbs are both 9005 bulbs. USDM low beam... Feb 8, 2012 - 10:43 AM
mechedjun QUOTE (richee3 @ Feb 8, 2012 - 10:43... Feb 8, 2012 - 10:56 AM smkr3w This is the wrong forum (exterior).
Check the Int... Feb 8, 2012 - 10:49 AM trdproven QUOTE (smkr3w @ Feb 9, 2012 - 1:49 A... Feb 8, 2012 - 7:43 PM smkr3w QUOTE (trdproven @ Feb 8, 2012 - 8:4... Feb 9, 2012 - 1:47 AM mechedjun QUOTE (trdproven @ Feb 8, 2012 - 7:4... Feb 13, 2012 - 8:54 AM rave2n For mine I just picked up the H1 connector from th... Feb 8, 2012 - 11:19 AM playr158 Ballast only comes into play if you have HIDs Feb 9, 2012 - 2:08 AM smkr3w QUOTE (playr158 @ Feb 9, 2012 - 3:08... Feb 9, 2012 - 2:11 AM richee3 Not all HID kits will let you do that. Some will b... Feb 9, 2012 - 6:25 AM smkr3w QUOTE (richee3 @ Feb 9, 2012 - 6:25 ... Feb 9, 2012 - 9:10 AM trdproven the problem is is that the H1 bulb only has wires ... Feb 9, 2012 - 6:05 PM richee3 QUOTE (trdproven @ Feb 9, 2012 - 5:0... Feb 9, 2012 - 6:37 PM smkr3w took some pics
when i ordered both highs and l... Feb 10, 2012 - 12:40 AM rave2n I think what you are showing in those pictures is ... Feb 10, 2012 - 8:16 AM smkr3w QUOTE (rave2n @ Feb 10, 2012 - 9:16 ... Feb 10, 2012 - 3:13 PM richee3 My DDM kit uses those same plugs. However, at no p... Feb 10, 2012 - 3:28 PM mkernz22 QUOTE (richee3 @ Feb 10, 2012 - 3:28... Feb 13, 2012 - 8:23 AM trdproven SMKRW's kit is incomplete, what actually goes ... Feb 12, 2012 - 10:32 PM smkr3w QUOTE (trdproven @ Feb 12, 2012 - 11... Feb 13, 2012 - 4:37 AM mkernz22 Can you get us some pictures of your lights? Feb 13, 2012 - 9:21 AM mechedjun QUOTE (mkernz22 @ Feb 13, 2012 - 9:2... Feb 13, 2012 - 2:59 PM richee3 My H1's have both power and ground. Feb 13, 2012 - 10:01 AM richee3 They came with the projectors. Feb 13, 2012 - 5:22 PM trdproven but seriously the stock harness meets up with the ... Feb 14, 2012 - 12:02 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 27th, 2025 - 2:44 PM |