![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 4, '10 From Jax Beach, FL Currently Offline Reputation: 0 (0%) ![]() |
I have a 95 Celica GT just under 200k. It had problems downshifting before, but I had replaced the gear oil and everything was smooth again. Today I stopped at a light and the car wouldnt shift into first...or second or anything. I turned the car off switched it into first then I was able to get it into second, but it wouldnt go any further or back to first. I had to drive home in second with my hazzard lights on. Luckily I was a mile away from home. The clutch seems like it is still strong. Could this be the pressure plate or something similar?
|
![]() |
![]() |
|
Enthusiast ![]() Joined Jun 4, '10 From Jax Beach, FL Currently Offline Reputation: 0 (0%) ![]() |
lol, yes I think im gonna use the "really tight" method for anything over 50 LBS. I was determined to finish this lil project today had to get pull out the lights, but I just manage to put everything back together. Started it up and ran it on the stands and everything is good. The clutch is a little soft. Im gonna try bleeding it a little more tomorrow and do a road test.
|
![]() ![]() |
Lo-Fi Version | Time is now: June 21st, 2025 - 11:42 AM |