Kouki Projectors Question Options

[mechedjun]

Done some research on these but couldn't find the info I was looking for so I'm asking the community for help.

1. To my understanding the USDM low beam bulbs do not fit the projectors (9006 to H4? I think?) so as far as wiring goes do I just take the old wiring off and just resolder to the new ones or do I need a resistor or something in between to get the current down?

2. Does the high beam bulbs the same between USDM and projectors?

Thanks

-Dave

[trdproven]

SMKRW's kit is incomplete, what actually goes to that ballast is another harness from the hid kit, your stock harness needs the adapter that goes straight into the Hid bulbs spades. nowhere does the stock wiring touch the ballast. like richees pics there is another harness the black one that goes to the ballast on the upper left. so basically the stock harness goes straight into the bulb.

[smkr3w]

SMKRW's kit is incomplete, what actually goes to that ballast is another harness from the hid kit, your stock harness needs the adapter that goes straight into the Hid bulbs spades. nowhere does the stock wiring touch the ballast. like richees pics there is another harness the black one that goes to the ballast on the upper left. so basically the stock harness goes straight into the bulb.

incomplete how? im not trying to argue, im just oh so confused now..
my kit doesnt have the same bulb/plug combo as the ddm one, but is set up like my pic above