6G Celicas Forums

Welcome Guest ( Log In | Register )

> v6 /s54 combo, bearing carrier question
post Feb 10, 2012 - 11:40 PM
+Quote Post
kurt95gt



Enthusiast
*****
Joined Aug 23, '11
From kenton ohio
Currently Offline

Reputation: 14 (100%)




Ok so ive done alittle research but havent found alot of info
i did read i need a spacer like a 3s running a s54 does but idk where to find one at or is that something i need to make
Any info on this would be great


--------------------
95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's
94 st hatch my daily driver
http://www.6gc.net/forums/index.php?showtopic=82235
n
 
Start new topic
Replies
post Feb 13, 2012 - 11:36 AM
+Quote Post
richee3



Moderator
*****
Joined Jun 29, '08
From Denver
Currently Online

Reputation: 59 (100%)




FWD will have to have that bracket. I'm curious if the 1MZ will sit further away from the firewall or closer to it than the 5S. If it sits farther away, I wonder if you could recycle the 5S bracket with longer bolts and washers between the bracket and the block to act as spacers.

Or have I missed the issue? Does the 5S bracket not bolt up to the 1MZ?

This post has been edited by richee3: Feb 13, 2012 - 11:39 AM


--------------------
"Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!

2006 Aston Martin V8 Vantage.
1998 Celica GT-
BEAMS Swapped.
2022 4Runner TRD Off Road Prenium.
2021 GMC Sierra AT4.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 24th, 2025 - 9:03 AM