Best fit for scion rims Options

[Tyglon]

I Picked up a set of TC rims for ultra cheap to go on my 95 gt. I want to lower it with an eibach kit and was wondering a few things: spacers(sizes), tires(size), and shock choice.

I've read that 225/45/17 are recommended. Is that at stock ride height or would that work lowered too?

38mm spacer for rear brings it to 7mm. That too far? Should I get the 25mm? I like hellaflush style, but not necissary.
And 15mm for front? Im not sure. Getting rear fenders rolled, I gathered that much.

Lastly, what shock is recommended to use with the lowering springs?

I appreciate all help and input. Thank you.

[SwissFerdi]

Okay, so, let me inject a bit o' experience here: I bought my tC wheels with 215/45/17, and have now switched to 225/45. I like the extra "beef" on the sidewall, but in turn, the tire is heavier on an already heavy wheel, and the bit of extra sidewall actually flexes, really taking away a bit of sensitivity and adding slight heft. It makes for a nice ride, but not very efficient - I imagine lots of drag as well. The ST doesn't need the extra rubber anyway as far as power goes, although the extra grip is nice. No issues with rubbing, lowered one-and-a-half inches.

My next try will be 215/40, which will hopefully improve on everything except for ride quality.

My other recommendation is to figure out the tire first and then mount everything, then decide on a spacer. It'll be easier to do once the wheels are actually on the car. As far as a lowering solution, the stickies will provide more concise advice than me.

This post has been edited by SwissFerdi: Feb 14, 2012 - 9:50 AM