Feb 22, 2012 - 1:49 AM
|
|
|
Enthusiast ![]() Joined Sep 30, '11 From Sydney Currently Offline Reputation: 0 (0%) |
Hi guys,
Was replacing the dizzy o-ring and broke a sensor i think When i had replaced the o-ring i went to fire up the engine and it did eventually but is horribly shaking and sounds like its running on 1 cylinder. This is what i broke, could this be whats causing my problem or did i probably just install the dizzy wrongly... ![]() ![]() ![]() Thanks |
![]() |
Feb 22, 2012 - 7:10 AM
|
|
|
Enthusiast ![]() Joined Sep 30, '11 From Sydney Currently Offline Reputation: 0 (0%) |
Really not sure but its a 1997 ST204 ZR which is basically the Australian GT. I thought anything after 1996 was ODBII but that is just a guess
|
Feb 23, 2012 - 2:02 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
Really not sure but its a 1997 ST204 ZR which is basically the Australian GT. I thought anything after 1996 was ODBII but that is just a guess you are correct. your car is a obdII vehicle. no check engine lights on? if i can remember obdII 6's timing cant be adjusted at the distributor. so i wouldnt know what would have your car running like crap. -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
![]() |
UVZ164 Identifying Part Feb 22, 2012 - 1:49 AM
808celica What motor? Looks like coolant temp sensor. How ma... Feb 22, 2012 - 1:57 AM
UVZ164 Its a 5s-fe and looks like 2 connectors Feb 22, 2012 - 1:58 AM
808celica yeah most likely a coolant temp sensor. Feb 22, 2012 - 2:00 AM
UVZ164 Would that cause the engine to not run properly th... Feb 22, 2012 - 2:01 AM
808celica http://www.auto-repair-help.com/auto_diagn...ture_... Feb 22, 2012 - 2:02 AM
cjh4l22 it could, but more than likely wouldn't cause ... Feb 22, 2012 - 2:22 AM
808celica QUOTE (cjh4l22 @ Feb 21, 2012 - 9:22... Feb 22, 2012 - 3:12 AM
UVZ164 finally found it in the BGB, it is the engine cool... Feb 22, 2012 - 2:25 AM
PolliS_5S-FE no you cant adjust timing after 96 Feb 23, 2012 - 4:49 AM
UVZ164 I replaced the coolant temp sensor and she fired u... Feb 23, 2012 - 7:42 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 28th, 2026 - 8:07 PM |