![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Oct 18, '07 From Orange County, CA Currently Offline Reputation: 3 (100%) ![]() |
Hi everyone,
when I am in neutral and revving, I hear a rattle from the passenger side axle. I raised the car and put pressure against the axle and that stopped the rattle. I started looking to see what's missing and i think something is not right with the mounting of the bracket. ![]() ![]() Thanks everyone This post has been edited by JasonX: Feb 24, 2012 - 9:51 PM -------------------- ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Oct 17, '11 From Kent, WA Currently Offline Reputation: 0 (0%) ![]() |
How many bolts hold the bracket against the block? I only have one on there. And on the lower part of the bracket there is a bolt hole that doesn't match up with anything. maybe you have the wrong axle bearing bracket I can't get a good photo from when I pulled one of my engines, but there are only two bolts that mount it to the block. The 3 hole on the left side doesn't get used um it should get used. i use mine i just replaced my pasenger side axle |
![]() ![]() |
Lo-Fi Version | Time is now: June 8th, 2025 - 9:15 AM |