![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) ![]() |
well im in the process of putting on my turbo. right now everything is stock. like the fuel pump which will be changed later on when the turbo is actullay on. ok so heress the deal. i put in the new 315cc injectos light green tops or whatever the same ohm independency. and i regapped my plugs to .030 all trac spec. the car wont run for more than like 1 secound lol. whats the problem? every thing is stock except the injectors and gap setting. help.
-------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 4, '03 From North Carolina Currently Offline Reputation: 0 (0%) ![]() |
this same thing happened to me
the engine wasnt recognizing the higher CC of the new injectors....replace your factory MAP sensor with a 2 bar MAP sensor off an mr2 turbo or supra (depending on which ct26 turbo you're using) i used the 3sgte 2 bar map out of mr2 turbo and it fixed my problem....i didnt run the car long on the new injectors but it still ran! you could pick one up off the mr2 boards for dirt cheap.....and it wouldn't hurt to go to advance auto or pep boys and have them air blast the injectors clean (costs about $10) |
![]() ![]() |
Lo-Fi Version | Time is now: September 2nd, 2025 - 2:41 PM |